Mark it with a small X. This is when the type of marking utensil comes in handy. All electronic stud finders require a battery to operate, and they can have inconsistent readings depending on the thickness and type of wall you are scanning. If you are concerned about scratches, consider grabbing a thin piece of felt to keep between the wall and the stud finder. More than enough reasons to grab your favorite stud finder from our list above and start enjoying its benefits. One’s not inherently better than the other; rather, each one offers different benefits for different situations. Once you complete it, you’ve nailed down one edge of the stud. You may also want to move vertically up and down from your initial mark to ensure you are on the stud. By knowing the position of studs, as well as metal wires and pipes behind the lath and the plaster, you can avoid some expensive and costly repairs down the road.
In order to find the studs, you need to have the right tool. Work from right to left and move the stud finder along the wall. A “center punch” feature (electronic models only) makes a small hole in the wall right over the center of a stud, which is the optimal spot for inserting a nail or screw—no need to carry a pencil to mark it. Since a stud is part of the wall support, there is a stud, then empty space, then another stud. The toughest part is finding the first stud, from there you should be able to easily find the others by measuring distance and verifying with your stud finder. Zircon Stud Sensor i65 One Step makes stud finding fast and simple, easy-to-read display indicates direction, edge, and center of stud. Some electronic models in the price range of the ProSensor 710 enjoy better user feedback, such as the Zircon MultiScanner i520 with its four stars, but they have limitations in comparison with the ProSensor 710. For one thing, they require a calibration step before each use that can result in false positives. You can use a level to mark the point to drill later.
Your mark will trace the line of the stud. The center of the stud will be 3/4 in. Magnetic stud finders do work well to find steel behind walls in commercial buildings. Yep, I do this too and magnets work great. Find many great new & used options and get the best deals for Strait-line Laser Level and Stud Finder at the best online prices at eBay! Turn on your stud finder and begin to search. Finally, turn on your stud finder. Turn off the electricity to the switch or outlet and remove the plastic cover to see on which side of the stud the switch or outlet is mounted by looking for the screws. When looking for an electromagnetic stud finder the more sensors equals better “vision” of the stud behind the wall. For the home improvement contractor who does a lot of remodeling work, it can be worth the investment as it saves in labor to know what is going on behind the wall.
However, if you are just getting into building, you might not know about all the specific functions and capabilities stud finders have to offer. If this is something you are interested in, you would do well to check the websites of hardware retailers or the specific brands that make stud finders. There are two types of stud finders, electromagnetic stud finders, and magnetic stud finders. There is nothing worse than mounting something and then having to move it AND repair the first holes you created. While this may seem straight forward, there are some things to consider. Often we think of mounting or hanging things as a simple task, however, you do need a clear workspace. Finally, clear your workspace. You also want to make sure your stud finder’s electrodes are clear of any dust or debris. One of the reasons as to why you would want to make good use of a stud finder is to ensure that you hang all your wall directions correctly and into the frame, rather than depend on lath and plaster for support. A stud finder uses an electronic sensor or magnet to find the stud (supporting structure) behind a wall.